How To Adjust the Handlebars on the Rize, RX, and RX Pro

Introduction

Many make the mistake of adjusting the bolts on the sides of the stem, which are not the correct bolts. This article will teach you how to adjust the handlebars on the Rize, RX, and RX Pro.

Tools Required

• 5mm Allen Key

Instructions

1. Locate the bolt in front of the stem.
2. Loosen the bolt with a 5mm Allen Key.
3. Adjust the handlebar to your liking.
4. Tighten the bolt completely with a 5mm Allen Key.
5. Test the handlebar for tightness.
6. Repeat steps 1-5 until the handlebar is in the desired position.